S8081N-32 Двупътен вентил с електрическа задвижка

Introduction:
S8081YSeries PID control valve has feature of high reliability and long service time,
PTFE graphite enhance ball seals and double EPDM stem seals, built-in unibody balancing valve allows reversing differential pressure, equal percentage flow, tight shut off pressure 1.4mpa, rated working pressure PN 40, max differential pressure0.35mpa, manual short circuit button,operation temperature range -5-121℃,and applied to regulate the flow of hot and chilled water. Low-pressure stem and 50%glycol solution in response to the demand of a controller in HVAC system.

Features and Characteristics: 
1, S8081N Series electric control ball valve has features of wide application and overall function
DN15 to DN50, BSP thread pipe
Two-way or three-way, mixing or diverting
Built-in unibody balancing valve.
Equal percentage flow 
Adjustable flux proportion
Ball and stem are made of stainless steel
Different options of torque 
Control type with on-off control, floating control, proportional control

2. S8081N series electric control valve designed for heavy working pressure ,and fitting for almost all kinds of HVAC system requirements.
Designed working pressure: 1.6Mpa 
Shut off pressure 1.4mpa
Maximum working differential pressure: 0.35Mpa 

3, S8081N Series electric control valve provide accurate control under any load conditions,
lBuilt-in unibody reinforced balancing valve without the risk of falling down.

4, S8081N series control valve adopts stainless steel ball and stem fitting for all HVAC project applications: 
l Suitable working temperature -5 to 121 ℃
l Applied to 50% glycol liquor.
l Applied to 100kPa stem.

5.S8081Nseries control valve provide various options for the valve and actuators,
So that can be fitted to meet allapplication requirements: